5.0-7.0 Bar intelligent valve positioner Device Net BUS Control CE
/ ISO / FDA
|Product Name||Intelligent valve positioner|
|Pneumatic pressure||5.0-7.0 bar|
|Level of protection||IP67|
|Standard function||0/4 - 20mA to 0 - 5/10V signal input|
|Optional function||0/4 - 20mA position feedback output|
|Optional function||Device Net BUS Control|
|Certificate||3A/54-02 (1580), PED/97/23/EC, FDA.177.2600, ISO|
|Delivery details||Usually within 20 days after receiving T/T down payment.|
The controller (IL - TOP) is mainly used in the systems of all
kinds of fluid process control and flow control.
IL - TOP could be installed to all kinds of actuators in linear
motion, such as pneumatic angle seat valve, diaphragm valve,
butterfly valve, globe valve and ball valve etc. which are the
valves for regulating flow.
IL - TOP could be installed to actuators easily which are suitable
for the situation of high purity.
0/4 - 20mA to 0 - 5/10V signal input (standard)
0/4 - 20mA position feedback output (optional)
Device Net BUS control (optional)
Linear motion / Rotary motion actuator (optional)
Pneumatic pressure: 5.0-7.0 bar
Level of protection: IP67
The control could be uses as a positioner or process controller.
As a positioner, it could set the valve position according to set
As a process controller, MPU will be received the signal from
control by comparing setting position value of valve with actual
position of valve, through PIC control algorithm, process
controller will drive the valve to the exact target positioner of
The controller is composed of MPU, detection unit by controlling
signal, position detector, LCD display, keyboard and piezoelectric
It's very simple install the controller and actuator, and the
display position of LCD could be adjusted.
To take the transparent cover down in anticlockwise direction, and
To operate keyboard, to loosen the base and 2 screws by using M5
To rotate it easily and adjust it to the display direction you
would like, and to re-tighten the 2 screws by wrench;
To loosen terminal box, to take down the 4 screws and open the box,
and to operate according to connection diagram. (Non-professional
is prohibited to operate.)
It needs connector to combine the controller with actuator.
|IL-TOP-001-M||Positioner + Process control||4 - 20mA / 0 - 5 / 10V||Single-acting|
|IL-TOP-002-M||Positioner + Process control||4 - 20mA / 0 - 5 / 10V||Double-acting|
|IL-TOP-001||Positioner + Process control|
|IL-TOP-002||Positioner + Process control||NO||Double-acting|
|IL-TOP-001-BUS||Positioner + Process control + BUS||Single-acting + BUS|
|IL-TOP-002-BUS||Positioner + Process control + BUS||Double-acting + BUS|